Perfect Pearls And Pigments  DTM CLEAR is a specially formulated 2K clearcoat for use on metals and some cases plastics. This clearcoat is especially suited for direct application to bare alloy wheels and also has great adhesion on plastic headlights and tail lights.

Unlike other ‘DTM’ clearcoats on the market this clear is actually formulated using special resins that have been laboratory tested on various metals and plastics and has direct adhesion on many other surfaces:

Steel,

Stainless Steel,

Aluminium,

Brass,

Galvanized,

Glass,

Plastics ABS, PUR, MA, GRP, PVC,

Ceramics

This clearcoat is extremely durable and can be used in many different applications. Anywhere were durability is needed but high gloss such as Alloy wheels, headlights and taillights or even door handles.

Our DTM clear can be used without thinner but up to 10% may be added for certain applications. Try adjusting spraying equipment first.

The mixing ratio of our DTM clear is 2:1 and must be used on with the supplied DTM activator and then left to sit for 15 minutes prior to use for the DTM clear to “Activate”. In instances where a faster cure time is required then we recommend the use of our DTM Accelerator to speed up the cure time without affecting adhesion (DTM Accelerator not included in kit but can be purchased separately)

It is always best to try out a sample and test for adhesion yourself. This can be done by applying the clear and baking leaving it a day to cool and finish curing and using a blade to cross hatch the clear and apply tape and remove.

As with all DTM clears, this does not provide any anti- corrosive properties. This works by creating a barrier effect over the substrate to stop the metal from oxidising.

Sizes available: 1.5L, 7.5L

DTM Accelerator 250ml, available to purchase separately