COLOMIX ANTIGRAVEL 1 kg

A one-component protective coating based on modified rubbers is used to protect car sills and wheel arches from stone impacts. The coating is resistant to salt, water, oils and petrol. The top coat is applied immediately after drying.
This is a stone-resistant body protection product. It forms a durable and elastic film with good anti-corrosion properties that protect against moisture, salt, oil and petrol.
Type: Based on modified phenolic resin and rubber.
Colour: Grey, black, white.
Density: 1450 − 1550 kg/m³
Surface type: Sheet steel, stainless steel, plastic (except polyethylene), alkyd primer, polyester putty.
Surface preparation: It is advisable to pre-prime, degrease, clean and dry the surface.
Dilution: Not diluted. Shake well before use.
Application method: applied by spraying with a special gun, pressure 3-5 bar and temperature not less than 5ºC, nozzle diameter 4 mm. It is recommended to apply in two or three layers. Waiting time between layers is about 5 minutes.
Application thickness: 100 µm in one layer
Drying: air /20ºC
− dry on dust: 20 min
− dry: 60-90 min
oven/60ºC
− dry: 30 min
Consumption: 3.5-4 m² /l, with a dry film thickness of 100 µm.
Packaging: 1 kg
Shelf life: 12 months.
Storage: in originally sealed packaging, in a dry and ventilated room at a temperature of 5ºC to 25ºC.